Categories
4B 6B 8B

Momentary mode – 8B/6B/4B

Under the glass cover there is a dip switch it’s job is to define the buttons mode (Using the included pin).
Disassemble the glass and continue by the instructions below.

Output R is momentary, use for dimmers, electric gates, etc.
To enable – move the desired output dipswitch to ON, button led will change to red.
In the picture output 2 will be momentary.
Notice:
In the same panel can’t set both momentary and safety mode.
In panels 6B/4B, dipswitches 4,5,6 are not valid.
Panels 2B/PT don’t have dipswitches.
Not valid to 2R panel.